I-Thin Powder Coating
Isingeniso Esijwayelekile:
Impushana enamathelayo cihlinzeka ngohlobo oluxubile, uhlobo lwe-polyester ehlanzekile nezinye izinhlobo ze-resin zobuciko obuhle bomphumela we-powder coating, ngokulandelanayo ofanele ukusetshenziswa kwangaphakathi noma ngaphandle.Lo mkhiqizo unomphumela wokuhlobisa ukubukeka okuyingqayizivele nokunethezeka, ongasiza ukumboza amaphutha wento eyisisekelo uqobo.Isetshenziswa kabanzi kuzo zonke izinhlobo zemikhiqizo yensimbi ephezulu yezinga eliphezulu.
Uchungechunge Lomkhiqizo:
Inganikeza okusanhlamvu kwesihlabathi, okusando kwesando, okusanhlamvu kukasilika, imabula, ukubukeka kwensimbi neminye imiphumela yomkhiqizo.
Ngokusho kwezidingo zabasebenzisi ukuhlinzeka ngemikhiqizo ehlukahlukene ye-gloss.
Izakhiwo Zomzimba:
Ukusatshalaliswa kosayizi wezinhlayiya: 100% ngaphansi kwe-micron eyi-100 (Kungashintshwa ngokuya ngezidingo ezikhethekile zokumboza)
Izimo zokwakha:
Ukwelashwa ngaphambi kwesikhathi: Ukwelashwa kwangaphambili okuhlukile kwama-substrates ahlukene (ukwelashwa kwe-phosphating, ukuqhunyiswa kwesihlabathi, ukwelashwa kokuchama)
Imodi yokwelapha: Imodi yokwelapha: ukwakhiwa kwesibhamu se-electrostatic manual noma okuzenzakalelayo
Izimo zokwelapha: kuye ngohlobo lwe-resin yomkhiqizo, sicela ubheke imiyalo enamathiselwe ukuze uthole imininingwane.
Ukusebenza kwe-coating:
| Into yokuhlola | Indinganiso yokuhlola noma indlela | Izinkomba zokuhlola |
| ukumelana nomthelela | ISO 6272 | 30-50kg.cm |
| ukuhlolwa kwenkomishi | ISO 1520 | 6mm |
| i-adhesive force (indlela ye-lattice yomugqa) | ISO 2409 | 0 izinga |
| ukugoba | ISO 1519 | 3mm |
| ubulukhuni bepensela | I-ASTM D3363 | 1H-2H |
| ukuhlolwa kwesifutho sikasawoti | ISO 7253 | > amahora angu-500 |
| ukuhlolwa okushisayo nokunomswakama | ISO 6270 | > 1000 amahora |
Amanothi:
1.Ukuhlola okungenhla kusebenzise amapuleti ensimbi awugqinsi angu-0.8mm agqinsiswe anogqinsi lwama-microns angu-60-80.
2.Izinkomba zokusebenza zezingubo ezingenhla zingahluka ngemiphumela yobuciko ehlukene kanye nezinhlobo ze-resin.
Ukufakwa okumaphakathi:
7-10 sq.m./kg;ukujiya kwefilimu okungamamicrons angama-80 (kubalwa ngesilinganiso sokusebenzisa impuphu engu-100%)
Ukupakisha nezokuthutha:
amabhokisi ahlanganiswe nezikhwama ze-polyethylene, isisindo senetha singama-20kg. Izinto ezingezona eziyingozi zingathuthwa ngezindlela ezihlukahlukene, kodwa kuphela ukugwema ukukhanya kwelanga, umswakama nokushisa, nokugwema ukuthintana nezinto zamakhemikhali.
Izidingo zesitoreji:
Ihlanzekile, yomile, ingena umoya, kude nokukhanya, izinga lokushisa legumbi elingaphansi kuka-30℃, futhi kufanele livalwe emthonjeni womlilo, kude nomthombo wokushisa.Isikhathi sokugcina esisebenzayo yizinyanga eziyi-12 kusukela ngosuku lokukhiqiza.Gwema ukunqwabelanisa izendlalelo ezingaphezu kwezi-4.
Amanothi:
Zonke izimpushana ziyacasula ohlelweni lokuphefumula, ngakho gwema ukuhogela impushana nesitimu ekwelapheni.Zama ukugwema ukuthintana okuqondile phakathi kwesikhumba kanye ne-powder coating.Geza isikhumba ngamanzi nensipho uma kudingeka.Uma uthintana namehlo, geza isikhumba ngokushesha ngamanzi ahlanzekile futhi ufune usizo lwezokwelapha ngokushesha.Ingqimba yothuli kanye nokufakwa kwezinhlayiya zempushana kufanele kugwenywe endaweni engaphezulu nekhona elifile.Izinhlayiya ezincane ze-organic zizovutha futhi zidale ukuqhuma ngaphansi kukagesi omile.Zonke izinto ezisetshenziswayo kufanele zimiswe phansi, futhi izisebenzi zokwakha kufanele zigqoke izicathulo ezimelene ne-static ukuze kugcinwe inhlabathi ukuze kuvinjelwe ugesi ongashintshi.
